Skip to content
Book a demoDemo

Knowledge · Machine builders

How do I meet the CRA reporting obligation for my installed base and manage the SBOM for each machine?

By Gerd Bart, Founder and Managing Director · Updated

The short answer

Since September 11, 2026 you report every actively exploited vulnerability in your machines within 24 hours through ENISA's reporting platform, including machines that have long been at the customer's site, and you inform the affected customers. To do that, you need to know quickly which delivered machines contain the affected component and who owns them. An SBOM is not mandatory for these machines. It becomes mandatory for machines placed on the market from December 11, 2027, and it already helps you find the affected machines today. In Transaction-Network you manage your installed base with serial number, customer and location, and every machine has its record with a bill of materials.

What applies since September 11, 2026

The Cyber Resilience Act, Regulation (EU) 2024/2847, applies in full from December 11, 2027. The reporting obligations in Article 14 have applied since September 11, 2026, and they also cover machines placed on the market before December 11, 2027 (Art. 69(3) and Art. 71(2)). They apply to products with digital elements that can be connected directly or indirectly to a network, which covers the vast majority of modern machines.

  • You report what is actively exploited.

    Actively exploited vulnerabilities and severe security incidents must be reported. A known vulnerability that nobody exploits does not have to be reported.

  • Purchased components count too.

    The obligation covers every actively exploited vulnerability contained in the machine, in your own code as well as in a purchased control system (Art. 14(1)).

  • Your customers hear it from you.

    You inform the affected users about the vulnerability and the remedy, where appropriate in a structured, machine-readable format (Art. 14(8)). If you know the affected customers, the VDMA advises informing them directly.

The three deadlines

StageActively exploited vulnerabilitySevere security incident
Early warningwithin 24 hours of becoming awarewithin 24 hours of becoming aware
Notificationwithin 72 hours of becoming awarewithin 72 hours of becoming aware
Final reportno later than 14 days after a remedy is availablewithin one month of the notification

Reports go simultaneously to the competent CSIRT and to ENISA, through ENISA's reporting platform (Art. 14(1) to (4)). The CRA does not require round-the-clock standby; the 24 hours run from reliable awareness, according to the VDMA's guidance of September 21, 2026.

What is not mandatory for machines in the field

For machines placed on the market before December 11, 2027 and not substantially modified afterwards, only Article 14 of the CRA applies (Art. 69(2) and (3)). The VDMA makes clear that for them an SBOM, a vulnerability management process, a contact point on the website, an active search for vulnerabilities and security updates are not mandatory. Informing customers can be enough as a remedy, for example instructions, a password change or disconnecting from the network.

Anyone who sells you an SBOM or automated vulnerability scanning as a legal requirement for your installed base goes beyond the regulation; the VDMA warns about this too. Both can still be useful, because they shorten the time to an answer.

From December 11, 2027: the SBOM for new machines

Annex I applies to machines placed on the market from December 11, 2027. Under Part II(1), you identify and document vulnerabilities and components, including by drawing up a software bill of materials in a commonly used, machine-readable format that covers at least the top-level dependencies.

  • The format.

    The German BSI's Technical Guideline TR-03183-2 names CycloneDX from version 1.6 or SPDX from version 3.0.1.

  • Per machine, not only per type.

    Delivered machines differ in control system, firmware and options. For a vulnerability to lead to serial numbers, the SBOM belongs to the machine as it was delivered and last modified.

  • You do not have to hand it out.

    There is no obligation to give the SBOM to customers. You provide it to the market surveillance authority on a reasoned request (Annex VII(8)).

  • Security updates are free of charge.

    You distribute available security updates without delay and free of charge, unless you have agreed otherwise with a business customer for a tailor-made machine (Annex I Part II(8)).

How to find the affected machines quickly

  • The installed base with serial number and customer.

    Every delivered machine with serial number, location and current operator. After resale and relocation, this link is often missing.

  • Components and software versions per machine.

    From the bill of materials, the order and service visits: which control system, which operating system, which firmware, and what changed during retrofits and updates.

  • Assess reports and record the clock.

    A fixed channel for reports from suppliers, customers and authorities, a person in charge, and a note of when you became reliably aware. From then on, the 24 hours run.

  • Prepare the customer information.

    A template for the message to affected customers, including the remedy. The VDMA advises having it ready by the 72-hour notification at the latest.

  • Practice once.

    Take a published vulnerability in a component you use and measure how long it takes to get to the list of affected customers.

How Transaction-Network handles it

In Transaction-Network you manage your installed base: every delivered machine with serial number, customer and location, with its record and bill of materials. That is the link you need first when a vulnerability appears, from the component to the machine and from the machine to the customer.

To start, you need your machines with serial numbers, the parts lists and customer and location. We take over data from your systems.

This page provides information and is not legal advice; the text of the regulation is authoritative.

Questions

Frequently asked questions

Does the CRA reporting obligation also apply to machines already at the customer's site?

Yes. Since September 11, 2026, Article 14 also applies to machines placed on the market before December 11, 2027 (Art. 69(3)).

Do I need an SBOM for my installed base?

Not as a legal requirement. For machines covered only by Article 14, the CRA does not require an SBOM. It becomes mandatory for machines placed on the market from December 11, 2027 (Annex I Part II(1)). It already helps you find affected machines quickly today.

What do I have to report within 24 hours?

An early warning for every actively exploited vulnerability and every severe security incident, through ENISA's reporting platform. The notification follows within 72 hours, then the final report.

Does the reporting obligation also cover purchased control systems?

Yes. You report every actively exploited vulnerability contained in the machine, whether in your own code or in a purchased component (Art. 14(1)).

Do I have to give my customers the SBOM?

No, there is no such obligation. You provide it to the market surveillance authority on a reasoned request (Annex VII(8)).

Demo

See your machines in one account.

In a demo we show you what your machine park looks like in one account: every manufacturer, every machine with its record, maintenance and the Service Brain.

Loading the calendar …

Scheduling calendar by HubSpot. It only loads when you click a booking button.